Dnp3 configuration files – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 277
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
237
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
DNP3 Configuration Files
You can set configuration files for each object. These configuration files allow you
to configure parameters such as Class level and Object Flag bit information for
each element. Only a Binary Data file type can be used for configuration file.
For Binary Input, Double Bit Binary Input and Small BCD type data, you can
configure Class information in the Configuration file. The lower 2 bits in the
elements of the Configuration files are the configuration of Class information to
the relative objects. Other bits are reserved.
Related Configuration Files:
• Binary Input Config File Number
Relationship between MicroLogix Data Files and Configuration Files
MicroLogix Data Files
Configuration Files
File Type
File Number
Maximum
Configurable
Elements
Binary Input File
Binary Input Config File
Only B file
3, 9 to 255
256
Binary Input Online Config File (In Series B)
Double Bit Binary Input File
Double Bit Binary Input Config File
Only B file
3, 9 to 255
256
Double-Bit Binary Input Online Config File (In Series B)
Binary Output File
Binary Output Config File
Only B file
3, 9 to 255
256
16-bit Counter File
16-bit Counter Config File
Only B file
3, 9 to 255
256
16-bit Counter Threshold Config File (In Series B)
Only N file
7, 9 to 255
32-bit Counter File
32-bit Counter Config File
Only B file
3, 9 to 255
256
32-bit Counter Threshold Config File (In Series B)
Only L file
9 to 255
Frozen 16-bit Counter File
Frozen 16-bit Counter Config File
Only B file
3, 9 to 255
256
Frozen 32-bit Counter File
Frozen 32-bit Counter Config File
Only B file
3, 9 to 255
256
16-bit Analog Input File
16-bit Analog Input Config File
Only B file
3, 9 to 255
256
16-bit Analog Input Deadband Config File (In Series B)
Only N file
7, 9 to 255
32-bit Analog Input File
32-bit Analog Input Config File
Only B file
3, 9 to 255
256
32-bit Analog Input Deadband Config File (In Series B)
Only L file
9 to 255
Short Floating Point Analog Input
File
Short Floating Point Analog Input Config File
Only B file
3, 9 to 255
256
Short Floating Point Analog Input Deadband Config
File (In Series B)
Only F file
8, 9 to 255
16-bit Analog Output File
16-bit Analog Output Config File (In Series B)
Only B file
3, 9 to 255
256
32-bit Analog Output File
32-bit Analog Output Config File (In Series B)
Only B file
3, 9 to 255
256
Short Floating Point Analog Output
File
Short Floating Point Analog Output Config File (In
Series B)
Only B file
3, 9 to 255
256
Small BCD File
Small BCD Class Config File
Only B file
3, 9 to 255
256