Wiring your analog channels, Input terminal block, Sensor 2 (v) voltage – Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 53
Advertising
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
39
Wire Your Controller Chapter 3
Wiring Your Analog
Channels
Analog input circuits can monitor voltage signals and convert them to serial
digital data.
The controller does not provide loop power for analog inputs. Use a power
supply that matches the transmitter specifications as shown.
The analog output can support a voltage function as shown in the following
illustration.
IV0(+)
IV2(+)
IV1(+)
IV3(+)
/7
COM 2
I/8
I/10
I/9
I/11
COM 3
I/13
I/15
I/17
I/19
I/12
I/14
I/16
I/18
COM
ANA
Input Terminal Block
Sensor 2 (V)
Voltage
44529
Sensor 3
(V) Voltage
Sensor 0 (V)
Voltage
Sensor 1 (V)
Voltage
Advertising
This manual is related to the following products: