Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 21)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 7
Chapter
2
Install Your Controller
This chapter shows you how to install your controller. The only tools you require
are a flat or Phillips head screwdriver and drill. Topics include:
• agency certifications
• compliance to European Union Directives
• installation considerations
• safety considerations
• power considerations
• preventing excessive heat
• master control relay
• installing a memory module
• using the battery
• controller mounting dimensions
• controller and expansion I/O spacing
• mounting the controller
• mounting 1762 expansion I/O
• connecting 1762 expansion I/O
Agency Certifications • UL Listed Industrial Control Equipment for use in Class I, Division 2,
Hazardous Locations, Groups A, B, C, D
• CE marked for all applicable directives
• C-Tick marked for all applicable acts
• C-UL Listed Industrial Control Equipment for use in Canada
Compliance to European
Union Directives This product has the CE mark and is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Directive
This product is tested to meet Council Directive 2004/108/EC Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)