Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 128)

86 Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Chapter 5 Using the LCD
The format string on the third line is displayed as decimal, hexadecimal or binary
for each word element, depending on what each elements means.
For more information, see the MicroLogix 1400 Programmable Controllers
Instruction Set Reference Manual, publication
1766-RM001 .
Using the Mode Switch The MicroLogix 1400 provides the controller mode switch on the LCD. The
possible positions of the mode switch are PROGRAM, REMOTE, and RUN.
You can change mode switch position using the Mode Switch screen on the LCD,
as shown below. In this example, the mode switch position is set to REMOTE.
All the built-in LCD screens except the Boot Message screen display
the current
mode switch position, at their top right portion, as shown below. In this example,
the mode switch position is set to RUN.
Current Mode Switch Position