Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 159)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 117
Using the LCD Chapter 5
3. Select the Protocol Cfg using the Up and Down arrow keys, and then press
the OK key.
4. Select the Modbus RTU Sl and then press the OK key.
5. The Modbus RTU Slave screen is displayed. Channel 0 is selected below.
6. Press the Up or Down arrow key to select a different channel, Channel 2 in
this example. Press the OK key.