Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 146)

104 Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Chapter 5 Using the LCD
5. The password screen is displayed. Press Up, Down, Left and Right keys to
enter a Master password up to a maximum of 10 digits. In this example, the
current Master password is allocated as "1234".
After entering the Master password, press the OK key on the LCD keypad.
6. The following menu is displayed.
If you want to change the SNMP setting, press the Up or Down key and
press the OK key to apply the change.