Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 330)

290 Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Appendix F MicroLogix 1400 Distributed Network Protocol (DNP3)
After you write your ladder program, select "Save As …" from the File menu of
RSLogix 500/RSLogix Micro. Select the save type as "RSLogix IMG Files
(*.IMG)"
After saving the file, you can see the file "ML1400A_DNP3S.IMG". This is the
file to be used for download.
IMPORTANT RSLogix 500/RSLogix Micro v8.10.00 and the MicroLogix 1400 Series
A controller do not support the opening of *.IMG files. Be sure to
store your ladder program in the RSLogix Files (*.RSS) format before
generating RSLogix IMG Files (*.IMG). Otherwise, you may lose the
latest modifications to your ladder program.