Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 93)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 79
Communication Connections Chapter 4
1761-CBL-PM02 Series C (or equivalent) Cable Wiring Diagram
Cable Length Connections from to AIC+ External Power
Supply
Required
(1)
Power Selection
Switch Setting
(1)
1761-CBL-AS03
1761-CBL-AS09 3 m (9.8 ft)
9.5 m (31.17 ft) SLC 500 Fixed,
SLC 5/01, SLC 5/02, and SLC 5/03 processors port 3 yes external
PanelView 550 RJ45 port port 3 yes external
(1)
External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
1
2
3
4
6
5
7
8
9
12
3 5
6 8 7
4
44605
Programming
Device Controller
9-Pin D-Shell 8-Pin Mini Din
9 RI B(+) 1
8 CTS GND 2
7 RTS RTS 3
6 DSR RXD 4
5 GND DCD 5
4 DTR CTS 6
3 TXD TXD 7
2 RXD A(-) 8
1 DCD