Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 65
Advertising
![background image](/manuals/579250/65/background.png)
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
51
Wire Your Controller Chapter 3
channel 0; switch 2 controls channel 1. The factory default setting for both
switch 1 and switch 2 is Current. Switch positions are shown below.
1
ON
2
Ch0 Ch1
Current (ON) Default
Voltage (OFF)
Switch Location
Advertising
This manual is related to the following products: