Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual - Manual (Page 143)

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014 101
Using the LCD Chapter 5
2. Press the OK key on the LCD keypad. The Advanced Settings Menu
screen is displayed.
3. If ENET Cfg is selected, press the OK key. If not, select ENET Cfg using
the Up and Down keys, and then press the OK key.
4. If Port Setting is selected, press the OK key, If not, select Port Setting using
the Up and Down keys, and then press the OK key.
5. The password screen is displayed. Press Up, Down, Left and Right keys to
enter Master password with maximum 10 digits. In this example, the
current Master password is allocated as "1234".
After entering the Master password, press the OK key on the LCD keypad.