Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 238
Advertising
![background image](/manuals/579250/238/background.png)
198
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
Appendix F MicroLogix 1400 Distributed Network Protocol (DNP3)
In RSLogix 500/RSLogix Micro, open Channel Configuration in the
MicroLogix 1400 project tree.
There are 4 configurations related to DNP3 protocol in RSLogix 500/RSLogix
Micro software:
• Channel 0 configuration
• Channel 2 configuration
• Channel 1 configuration
• DNP3 Slave Application Layer configuration.
Advertising
This manual is related to the following products: