Watson-Marlow MM440 - Manual (Page 269)

Issue 10/06 5 MICROMASTER 440 specifications
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0 269
Input voltage range 3 AC 380 V – 480 V. ± 10 %
(with built in Class A Filter)
Order No. 6SE6440- 2AD22-
2BA1
2AD23-
0BA1
2AD24-
0BA1
2AD25-
5CA1
2AD27-
5CA1
2AD31-
1CA1
2AD31-
5DA1
[kW] 2.2 3.0 4.0 5.5 7.5 11.0 15.0
Output Rating (CT)
[hp] 3.0 4.0 5.0 7.5 10.0 15.0 20.0
Output Power [kVA] 4.5 5.9 7.8 10.1 14.0 19.8 24.4
CT-Input Current 1) [A] 7.5 10.0 12.8 15.6 22.0 23.1 33.8
CT Output Current [A] 5.9 7.7 10.2 13.2 18.4 26.0 32.0
VT Input Current 1) [A] – – – 17.3 23.1 33.8 37.0
VT-Output Current [A] – – – 20.2 29.0 39.0 45.2
Fuse [A] 16 16 20 20 32 35 50
Recommended 3NA 3805 3805 3807 3807 3812 3814 3820
for UL specified 3NE
* * * * * *
1817-0
[mm 2 ] 1.5 1.5 2.5 2.5 4.0 6.0 10.0
Input Cable Min.
[awg] 16 16 14 14 12 10 8
[mm 2 ] 6.0 6.0 6.0 10.0 10.0 10.0 35.0
Input Cable Max.
[awg] 10 10 10 8 8 8 2
[mm 2 ] 1.0 1.0 1.0 2.5 4.0 6.0 10.0
Output Cable Min.
[awg] 18 18 18 14 12 10 8
[mm 2 ] 6.0 6.0 6.0 10.0 10.0 10.0 35.0
Output Cable Max.
[awg] 10 10 10 8 8 8 2
[kg] 3.4 3.4 3.4 5.7 5.7 5.7 17.0
Weight
[lbs] 7.5 7.5 7.5 12.5 12.5 12.5 37.0
Order No. 6SE6440- 2AD31-
8DA1
2AD32-
2DA1
2AD33-
0EA1
2AD33-
7EA1
2AD34-
5FA1
2AD35-
5FA1
2AD37-
5FA1
[kW] 18.5 22.0 30.0 37.0 45.0 55.0 75.0
Output Rating (CT)
[hp] 25.0 30.0 40.0 50.0 60.0 75.0 100.0
Output Power [kVA] 29.0 34.3 47.3 57.2 68.6 83.8 110.5
CT-Input Current 1) [A] 37.0 43.0 59.0 72.0 87.0 104.0 139.0
CT Output Current [A] 38.0 45.0 62.0 75.0 90.0 110.0 145.0
VT Input Current 1) [A] 43.0 59.0 72.0 87.0 104.0 139.0 169.0
VT-Output Current [A] 45.0 62.0 75.0 90.0 110.0 145.0 178.0
Fuse [A] 63 80 100 125 160 200 250
Recommended 3NA 3822 3824 3830 3832 3836 3140 3144
for UL specified 3NE 1818-0 1820-0 1021-0 1022-0 1224-0 1225-0 1227-0
[mm 2 ] 10.0 16.0 25.0 25.0 35.0 70.0 95.0
Input Cable Min.
[awg] 8 6 3 3 2 2/0 3/0
[mm 2 ] 35.0 35.0 35.0 35.0 150.0 150.0 150.0
Input Cable Max.
[awg] 2 2 2 2 300 300 300
[mm 2 ] 10.0 16.0 25.0 25.0 50.0 70.0 95.0
Output Cable Min.
[awg] 8 6 3 3 1/0 2/0 3/0
[mm 2 ] 35.0 35.0 35.0 35.0 150.0 150.0 150.0
Output Cable Max.
[awg] 2 2 2 2 300 300 300
[kg] 17.0 17.0 22.0 22.0 75.0 75.0 75.0
Weight
[lbs] 37.0 37.0 48.0 48.0 165.0 165.0 165.0
1) Secondary conditions: Input current at the rated operating point - applies for the short-circuit voltage of the line
supply V
k
= 2 % referred to the rated drive converter power and a rated line supply voltage
of 400 V without line commutating reactor.
* UL listed fuses such as Class NON from Bussmann are required for use in America