Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 102)

102 YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual
4.7 Test Run Checklist
4.7 Test Run Checklist
Review the checklist before performing a test run. Check each item that applies.
No. Checklist Page
1 Thoroughly read the manual before performing a test run. –
2 Check the Wiring Checklist on page 83 . 83
3 Set the correct power supply voltage. 94
4 Turn on the power supply to the converter and drive. 94
5 Correctly sequence the Run commands. 97
6 The should light after giving a Run command. –
7
To give Run command and DC bus voltage reference from the digital operator, press key to set
to LOCAL.
87 , 93
8
To give Run command and DC bus voltage reference from the control circuit terminals, press the
to set REMOTE. (The LO/RE indicator is lit off while REMOTE is set.)
93
RE
LO
RE
LO
TOEP_C710656_07C_2_0.book 102 ページ ２０１５年１月９日 金曜日 午後６時２３分