Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 255)

D.3 UL Standards
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 255
St
and
ar
ds Co
mpl
ia
nce
D
◆ Precautionary Notes on External Heatsink (IP00/Open Type enclosure)
When using an external heatsink, UL compliance requires that exposed capacitors in the main circuit are covered to
prevent injury to surrounding personnel.
The portion of the external heatsink that projects out can either be protected with the enclosure, or with the appropriate
capacitor cover after converter installation is complete. Use the table below to match converter models and capacitor
cover. Capacitor covers can be ordered from a Yaskawa representative or directly from the Yaskawa sales department.
The table below lists available capacitor covers.
Table D.9 Capacitor Cover
Figure D.18
Figure D.18 Capacitor Cover (2A0030 to 2A0130, 4A0030 to 4A0370)
Model Code Number Figure
2A0030
<1> Requires two sets.
100-061-274
Figure D.18
2A0050 100-061-275
2A0065 100-061-277
2A0090 100-061-277
2A0130 100-061-278
4A0030 100-061-274
4A0040 100-061-274
4A0060 100-061-275
4A0100 100-061-275
4A0130 100-061-278
4A0185 100-061-278
4A0270 100-061-280
4A0370 100-061-280
4A0630 100-061-281 <1> Figure D.19
Converter (outside panel)
Opening to capacitors
Converter (inside panel)
Installation screw
Capacitor cover
TOEP_C710656_07C_2_0.book 255 ページ ２０１５年１月９日 金曜日 午後６時２３分