Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 92)

4.3 The Drive and Programming Modes
92 YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual
◆ Verifying Parameter Changes: Verify Mode
The Verify Mode lists edited parameters from the Programming Mode. The Verify Mode helps determine which settings
have been changed, and is particularly useful when replacing a converter. If no settings have been changed, the Verify
Mode will read “None”. The Verify Mode also allows users to quickly access and re-edit any parameter settings that have
been changed.
Note: A1-, and A2-01 to A2-32 are not displayed even when those parameters have been changed from their default values.
7.
Press the key and enter 0.
8.
Press and the converter will confirm the change.
9. The display automatically returns to the screen shown in Step 4.
10. Press the
key until back at the initial display.
Step Display/Result
1. Turn on the power to the converter. The initial display appears.
2. Press or until the display shows the top of the Verify Menu.
3.
Press to enter the list of parameters that have been edited from their original
default settings.
If parameters other than b1-02 have been changed, use the or key to scroll
until b1-02 appears.
4. Press the key to access the setting value.
Step Display/Result
-PRMSET-
b1-02=1 *1*
Digital Inputs
“1”
PRG
Run Source 1
← →
Entry Accepted
← →
-PRMSET-
b1-02=0 *0*
Operator
PRG
Run Source 1
- MODE -
U1-51= 330V
U1-52= 330V
U1-03= 0.00A
DRV
Volt Ref(OPR)
Rdy
RSEQ
LREF
- MODE -
U1-51= 330V
U1-52= 330V
U1-53= 0.00A
DRV
Volt Ref (OPR)
Rdy
RSEQ
LREF
- MODE - PRG
Modified Consts
HELP DATA
Modified
X Parameters
b1-02 = 0 *0*
Operator
- VERIFY - PRG
Run Source 1
Rdy
Home DATA
b1-02 = 0 *0*
Operator
“1”
- VERIFY - PRG
Run Source 1
Rdy
Home DATA
TOEP_C710656_07C_2_0.book 92 ページ ２０１５年１月９日 金曜日 午後６時２３分