Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 148)

6.4 Cooling Fans
148 YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual
4. Remove the fan guard and replace the cooling fans.
Note: 1. Do not pinch the fan cable between parts when reassembling the fan unit.
2. Install the internal circulation fans so that they blow air upward. Install the cooling fan so that it blows air downward.
Figure 6.15
Figure 6.15 Fan Unit Disassembly
Cooling Fan Wiring: 2A0050, 4A0060, 4A0100
1. Position the protective tube so the fan connector sits in the center of the protective tube.
2. Place the fan connector covered by the tube.
Figure 6.16
Figure 6.16 Cooling Fan Wiring: 2A0050, 4A0060, 4A0100
3. Make sure that the protective tube does not stick out beyond the fan guard.
A – Fan guard C – Cooling fan (Air flow: Upward)
B – Cable cover D – Circulation fan (Air flow: Downward)
A
A
B
C
C
D
B A
C
Airflow
Airflow
Airflow
Airflow
2A0050, 4A0060, 4A0100
2A0130, 4A0130, 4A0185 2A0065, 2A0090
Protective tube 次回用
Connector for fan B1
Fan B1 Fan B2
2A0050 㧘4A0060 4A0100
Connector for fan B2
次回用
TOEP_C710656_07C_2_0.book 148 ページ ２０１５年１月９日 金曜日 午後６時２３分