Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 91)

4.3 The Drive and Programming Modes
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 91
S
ta
rt
-Up Pr
ogr
amming
&
O
p
er
at
io
n
4
■ Programming Mode Details
The following actions are possible in the Programming Mode:
• Verify Mode: View a list of parameters that have been changed from the default values.
• Setup Mode: Access a list of commonly used parameters to simplify setup. Refer to
Setup Group Parameters on
page 91 .
• Parameter Setting Mode: Access and edit all parameter settings.
Setup Group Parameters
Parameters most likely to be changed are assigned to the group of User Parameters, A2-01 through A2-32. User
Parameters are part of the Setup Group, which provides quicker access by eliminating the need to scroll through multiple
menus.
Table 4.4 lists the default settings of the A2- parameters.
Note: Parameter b1-02 is displayed in Setup Mode regardless of A2- parameter settings.
Table 4.4 Setup Group Parameters
◆ Changing Parameter Settings or Values
This example explains changing b1-02 (Run Command Selection) from 01 to 00.
A2- Default Name
A2-01 b1-18 Voltage Reference Source
A2-02 b1-02 Run Command Selection
A2-03 d8-01 DC Bus Voltage Reference
Step Display/Result
1. Turn on the power to the converter. The initial display appears.
2.
Press the or key until the Parameter Setting Mode screen appears.
3.
Press the key to enter the parameter menu tree.
4.
Press or key to select the B parameter group.
5.
Press two times.
6.
Press to view the current setting value (1). “1” Flashes.
- MODE -
U1-51= 330V
U1-52= 330V
U1-53= 0.00A
DRV
Volt Ref(OPR)
Rdy
RSEQ
LREF
- MODE - PRG
Programming
← →
-PRMSET-
Initialization
Select Language
PRG
A 1-00= 0
← →
-PRMSET-
Sequence
Run Source 1
PRG
b1-02=1
← →
-PRMSET-
Sequence
Run Source 1
PRG
b1-02=1
-PRMSET-
b1-02=1 *1*
Digital Inputs
PRG
Run Source 1
← →
-PRMSET-
b1-02=1 *1*
Digital Inputs
“1”
PRG
Run Source 1
← →
TOEP_C710656_07C_2_0.book 91 ページ ２０１５年１月９日 金曜日 午後６時２３分