Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 28)

28 YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual
2.1 Section Safety
2.1 Section Safety
W ARNING
Fire Hazard
Ensure proper cooling when installing an IP00/IP20 converter in a closed panel or cabinet.
Ensure the air temperature entering the converter is 50
° C (122 ° F) or cooler by use of a cooling fan or air conditioner.
Failure to comply could result in overheating and fire.
Crush Hazard
Only allow qualified personnel to operate a crane or hoist to transport the converter.
Failure to comply may result in serious injury or death from falling equipment.
Use a dedicated lifter when transporting the converter by a lifter.
Failure to comply may result in serious injury or death from falling equipment.
Only use vertical suspension to temporarily lift the converter during installation to an enclosure panel.
Do not use vertical suspension to transport the converter.
Failure to comply may result in serious injury or death from falling equipment.
Use screws to securely affix the converter front cover, terminal blocks, and other converter components prior to
vertical suspension.
Failure to comply may result in serious injury or death from falling equipment.
Do not subject the converter to vibration or impact greater than 1.96 m/s 2 (0.2 G) while it is suspended by the
cables.
Failure to comply may result in serious injury or death from falling equipment.
Do not attempt to flip the converter over or leave the converter unattended while it is suspended by the wires.
Failure to comply may result in serious injury or death from falling equipment.
CAUTION
Crush Hazard
Do not carry the converter by the front cover or the terminal cover.
Failure to comply may result in minor or moderate injury from the main body of the converter falling.
TOEP_C710656_07C_2_0.book 28 ページ ２０１５年１月９日 金曜日 午後６時２３分