Toshiba H1 Series - Manual (Page 22)

TMP92CZ26A
92CZ26A-19
3.2 Memory Map
Figure 3.2.1 is a memory map of the TMP92CZ26A.
Figure 3.2.1 Memory Map
Note1: Don’t use specified 64kbyte area of above 16M byte when using debug mode. This is because the area is reserved
for control in the debug mode.
Note2: Don’t use the last 16-byte area (FFFFF0H to FFFFFFH). This area is reserved as internal area.
000000H
002000H
16Mbyte area
(R)
( −R)
(R
+)
(R
+ R8/16)
(R
+ d8/16)
(nnn)
Direct area(n)
64Kbyte area
(nn)
Internal I/O
(8 Kbyte)
Internal RAM
(288 Kbyte)
04A000H
010000H
( = Internal area)
FFFF00H
FFFFFFH
Vector table (256 Byte)
External memory
000100H
External memory
F00000H
F10000H
Provisional Emulator Control Area
(64kbyte) (Note1)
046000H
(Internal Back Up RAM 16kbyte)
001FF0H