Toshiba H1 Series - Manual (Page 93)

TMP92CZ26A
92CZ26A-90
3.6.2 SFRs
The DMAC has the following SFRs. These registers are connected to the CPU via a 16-bit
data bus.
(1) HDMASn (DMA Transfer Source Address Setting Register)
The HDMASn register is used to set the DMA transfer source address. When the source
address is updated by DMA execution, HDMASn is also updated.
HDMAS0 to HDMAS5 have the same configuration.
Although the bus sizing function is supported, the address alignment function is not
supported. Therefore, specify an even-numbered address for transferring 2 bytes and an
address that is an integral multiple of 4 for transferring 4 bytes.
HDMASn Register
7 6 5 4 3 2 1 0
bit Symbol DnSA7 DnSA6 DnSA5 DnSA4 DnSA3 DnSA2 DnSA1 DnSA0
Read/Write R/W
After reset 0 0 0 0 0 0 0 0
Function Source address [7:0] for DMAn
15 14 13 12 11 10 9 8
bit Symbol DnSA15 DnSA14 DnSA13 DnSA12 DnSA11 DnSA10 DnSA9 DnSA8
Read/Write R/W
After reset 0 0 0 0 0 0 0 0
Function Source address [15:8] for DMAn
23 22 21 20 19 18 17 16
bit Symbol DnSA23 DnSA22 DnSA21 DnSA20 DnSA19 DnSA18 DnSA17 DnSA16
Read/Write R/W
After reset 0 0 0 0 0 0 0 0
Function Source address [23:16] for DMAn
Source address
[23:16]
Source address
[15:8]
Source address
[7:0]
Channel 0
(0902H) (0901H)
HDMAS0
(0900H)
Channel 1
(0912H) (0911H)
HDMAS1
(0910H)
Channel 2
(0922H) (0921H)
HDMAS2
(0920H)
Channel 3
(0932H) (0931H)
HDMAS3
(0930H)
Channel 4
(0942H) (0941H)
HDMAS4
(0940H)
Channel 5
(0952H) (0951H)
HDMAS5
(0950H)
Note: Read-modify-write instructions can be used on all these registers.
Figure 3.6.2 HDMASn Register
HDMASn