Toshiba H1 Series - Manual (Page 26)

TMP92CZ26A
92CZ26A-23
TMP92CZ26A has two PLL circuits: one is for CPU (PLL0) and the other for USB (PLL1).
Each PLL can be controlled independently. Frequency of external oscillator is 6 to 10MHz.
Don’t connect oscillator more than10MHz. When clock is input by using external oscillator,
range of input frequency is 6 to10MHz. Don’t input the clock over 10MHz.
Table 3.3.1 Setting example for f
OSCH
High frequency:
f
OSCH
System
clock:
f
SYS
System
clock:
f
SYS
USB
clock:
f
USB
(a) PLL, USB (PLL0 ON/PLL1ON) 10.0 MHz Max 80 MHz Max 60 MHz 48 MHz
(b) PLL, No USB (PLL0 ON/PLL1OFF) Max 10.0 MHz Max 80 MHz Max 60 MHz −
(c) No PLL, No USB (PLL0 OFF/PLL1OFF) Max 10.0 MHz Max 10 MHz Max 10 MHz
−
Note: When using USB, set high-frequency oscillator to 10.0 MHz.