Toshiba H1 Series - Manual (Page 7)

TMP92CZ26A
92CZ26A-4
(28) Stand-by function
• Three Halt modes : IDLE2 (programmable), IDLE1, STOP
• Each pin status programmable for stand-by mode
• Built-in power supply management circuits (PMC) for leak current provision
(29) Clock controller
• Built-in two blocks of clock doubler (PLL). PLL supplies 48 MHz for USB and 80 MHz for CPU from
10MHz
• Clock gear function: Selectable high-frequency clock fc to fc/16
• Clock for Timer (fs = 32.768 kHz)
(30) Operating voltage:
• Internal V CC = 1.5V, External I/O Vcc = 3.0 to 3.6 V
• 2 power supplies (Internal power supply (1.4 to 1.6), External power supply (3.0 to 3.6)
(31) Package
• 228 pin FBGA :P-FBGA228-1515-0.80A5