Toshiba H1 Series - Manual (Page 480)

TMP92CZ26A
92CZ26A-477
3.17 SPIC (SPI Controller)
SPIC is a Serial Peripheral Interface Controller that supports only master mode.
It can be connected to SD card, MMC (Multi Media Card) etc. in SPI mode.
The features are as follows;
1) 32 byte –FIFO (Transmit / Receive)
2) Generate CRC7 and CRC16 (Transmit / Receive data)
3) Baud Rate: 20Mbps max
4) Connect several SD cards and MMC. (Use other output port for /SPCS pin as /CS)
5) Use as general clock synchronous SIO.
MSB/LSB-first, 8/16bit data length, rising/falling edge
6) 2 Interrupts: INTSPITX (Trans interruption), INTSPIRX (receive interruption)
Select Read/Mask for interrupts: RFUL, TEMP, REND and TEND