Lenze DSD - Manual (Page 242)

8 Motion design
8.2 MotionDesigner
242
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2.6.4 Creating and editing elements
For creating and editing, use the functions in the Toolbar or the corresponding shortcuts.
Trapezoidal element
S-shaped element
Creating:
1. Highlight the motion profile in the Object area.
2. Select the desired trapezoidal shape in the
Parameter area: Description
under the Profile tab.
3. Click the icon in the toolbar.
4. Keep the left mouse button pressed and zoom in the element in the
Graphic area.
Editing:
1. Select element.
2. Move mouse pointer over the element.
• The pointer changes if editing is possible.
• The reference points and the height can be shifted.
• The proportions of the 1/3 trapezium cannot be changed.
3. Press the left mouse button and change the element.
• If the trapezium is grabbed at the sides (pointer does not changed),
the element can be shifted on the X axis.
Creating:
1. Highlight the motion profile in the Object area.
2. Click the icon in the toolbar.
3. Keep the left mouse button pressed and zoom in the element in the
Graphic area.
Editing:
1. Select element.
2. Move mouse pointer over a nodal point.
• The pointer changes.
3. Press left mouse button and shift the nodal point.
• If the line is grabbed (pointer does not change), the element can be
shifted.