Lenze DSD - Manual (Page 60)

6 Drive dimensioning tools
6.2 Optimising drive solutions
60
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Legend Description
 Application data
Original data of the application.
• Values cannot be changed.
Original data of the application.
• In these input fields, values can be changed.
Changed data of the application.
• Changes are accepted when the input field is exited.
 Motion design
• Click the MotionDesigner button to change the motion data.
 Result comparison
• The left column shows calculated values of the original application.
• The Overview register provides an overview of the most important values.
• The Application, Gearbox, Motor and Inverter registers show detailed values.
• The Energy costs and Energy comparison registers show calculated values with regard to energy
efficiency.
Newly calculated value.
Newly calculated value which exceeds the limit value.
• If the limit value is exceeded, a message with a detailed description is provided.
Button to open diagrams of the application or of the component.
Buttons to open messages of the application or of the component.
 Click the black triangle in the Save button to open the selection menu.
• Save the newly calculated dimensioning as separate DSD project.
• Create a brief or detailed protocol about the newly calculated dimensioning.
• Create an Energy Performance Certificate about the newly calculated dimensioning.
 Click the Close button to exit the Application Tuner.