Lenze DSD - Manual (Page 25)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
25
3 User interface
3.1 Control and function elements
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The MotionDesigner serves to carry out the most frequently required functions via the icons in the
toolbar. Many functions can also be carried out via shortcuts. There are no menu commands. ( 225)
• Click on an icon to carry out the respective function.
Symbol Keyboard com-
mand
Function
<Ctrl>+<N> Create new motion profile.
<Ctrl>+<O> Load motion profile.
 Load the motion profile ( 234)
<Ctrl>+<S> Save motion profile.
• When a newly created motion profile is saved, you are asked for the destination
of the Imp file.
• When the motion profile is newly saved, the Imp file is updated.
 Save motion profile ( 235)
– Save motion profile as...
• During the saving process, you are asked for the destination of the Imp file.
•
 Save motion profile ( 235)
– Import the motion profile with parameter profiles from an ASCII file.
 Importing profile data ( 236)
– Create note for motion profile
• The note is attached to the "Motion" dimensioning step.
• The function is only available with the application-dependent MotionDesigner.
 Notes ( 37)
<Del> Delete highlighted element.
• The element is deleted permanently.
– Application analysis.
• Shows diagrams and table of values via the entered and calculated values with
regard to a cycle of the motion profile.
• The function is only available with the application-dependent MotionDesigner.
<Ctrl>+<Z> Undo last action.
<Ctrl>+<Y> Redo last undone action.
– Default settings for the dialog box.
• Identical to the "Motion" register in the DSD menu ExtrasSettings.
 Settings ( 46)
 "Motion" register ( 48)
– Zoom x-axis and y-axis
• Draw up a rectangle across the area to be zoomed in by keeping the left mouse
button pressed.
– Return to standard view.
<Ctrl>+<X> Cut the highlighted element and drag to the clipboard.
<Ctrl>+<C> Copy the highlighted element into the clipboard.
<Ctrl>+<V> Paste the element from the clipboard.
– Select the element or deactivate an active symbol.