Lenze DSD - Manual (Page 32)

3 User interface
3.1 Control and function elements
32
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.1.4 Navigation tree and result tree
Below the drawing on the left the Navigation tree or the Result tree is displayed.
• Via the two registers below the Navigation tree or Result tree you can switch between the two
views anytime.
3.1.4.1 Navigation tree
The Navigation tree indicates your position within the dimensioning process:
• A green tick indicates all the dimensioning steps that have been edited.
• The steps still to be edited are indicated by a question mark.
• The current step is marked by a red arrow.
• The context menu (select dimensioning step and click the right mouse button) serves to execute
the following commands:
• Creating an alternative ( 57)
• Create note and delete note.  Notes ( 37)
• The dimensioning steps marked with contain notes.
• A mouse-click on the icon opens the note.

Tip!
In the Navigation tree you can also select dimensioning steps that have been previously ed-
ited and change to the corresponding input template.