14 direction of movement, 8motion design – Lenze DSD User Manual
Page 276
Advertising
8
Motion design
8.3
Predefined motion profile according to operating mode
276
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.3.5.14
Direction of movement
Parameter
Description
Forward/back /
Up/down
• Positive
• The cycle is only positive. Accordingly, the drive only moves in positive direction.
• Both
• The cycle alternates between positive and negative. Accordingly, the drive first moves to
the positive, then to the negative direction.
Advertising