1 roughly estimated calculation, 2 product features, Roughly estimated calculation – Lenze DSD User Manual
Page 63: Product features, 6drive dimensioning tools
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
63
6
Drive dimensioning tools
6.3
Dimensioning "easily and quickly" or "complex and precisely"
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.1
Roughly estimated calculation
For a roughly estimated determination of the requirements you can alternatively dimension a con-
trolled drive with a predefined motion profile according to operating mode.
• The operating modes are scaled loads (VDE 0530) for a drive motor. The operating modes
S1 ... S10 are distinguished.
Predefined motion profile according to operating mode
• If the starting/braking process has no noticeable impact on the machine, often also the operat-
ing modes S1, S2, S3, and S6 can be considered for calculation. These operating modes are also
provided in the DSD.
6.3.2
Product features
Apart from the component data required for physical dimensioning, there are also important char-
acteristics for mounting, extension, and operation. After dimensioning the drive system you can in-
dividually define the characteristics for each component via the Product features dimensioning step.
• For dimensioning a component, product features are not required.
• The dimensioning process can be completed without defining the product features.
• Alternatively you can define the options in the Drive Solution Catalogue (DSC).
Call up auxiliary calculator
Via this button you can call up an auxiliary calculator for calculating the val-
ue to be entered.
Display field
Text fields with a grey background only serve to display a value; entering/
changing the value is not possible.
• The values in the text fields with a grey background will be considered in
the calculation.
• If you activate the option field With detailed values , the display fields
change to input fields where you can enter further values for the applica-
tion.
Designation
Information