Lenze DSD - Manual (Page 53)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
53
5 Managing projects
5.1 Create new project
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.1.1.1 Customer data
Customer data contain the data of the recipient of the protocol.
• In order to avoid a repeated specification of the data with regard to a further project for the
same customer, customer data is stored in an internal database in the DSD.
• The customer data are saved in a common data structure. They can only be created, altered, de-
leted, imported, exported, and selected together.
• After entering the data, the respective customer data set can be selected via a selection menu
next to the identifier "Customer", "Customer no.", "Contact person".
• If a selection from the list has been made, it can be rejected by the 'selection "All" '.

Tip!
The data in the login template can be called anytime by selecting "Login". Then you can al-
ter the data in the login template.
Button Function
Import / export customer data Import or export of the customer data (database as a whole)
• An export enables the transfer/backup of a user's complete customer da-
tabase. This can make sense if the DSD has to be uninstalled or the data
are to be provided to a third party.
• An import adopts the data of an external customer database to the DSD,
i. e. the existing customer database is completed by the imported cus-
tomer data.
Remove Delete a data record from the customer database
Change Change a data record in the customer database
• If a customer data record is to be changed this can only be effected in a
cohesive manner. The changed data record afterwards is provided for se-
lection.
New entry Create a new data record in the customer database
• Additional information can be added via the Change button.
All customers Reset the customer data mask to the initial state.