Lenze DSD - Manual (Page 410)

16 Auxiliary means
16.1 Auxiliary means integrated in the DSD
410
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16.1.1.4 Gearbox calculator

How to call the calculator:
• Via the ToolsGearbox calculator... command
• Via the
icon in the toolbar or in the input area.
The calculator has two tabs.
Transmission ratio tab
On the Transmission ratio tab, the transmission ratio is calculated:
Button Function
= Display result.
Close Close dialog box.
• Only available if the calculator is called via the toolbar or the menu bar.
Accept Accept calculated value for the parameter and close dialog box.
• Only available if the calculator is called via the input area.
Cancel Discard calculated value and close dialog box.
• Only available if the calculator is called via the input area.
Input field Meaning
Specification Selection of the input (diameter or number of teeth).
d
1
, d
2
Diameter presetting for the calculation
• For "Diameter" presetting selection only.
Z
1
, Z
2
Default with regard to the number of teeth for the calculation.
• For presetting selection "Number of teeth" only.