Lenze DSD - Manual (Page 33)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
33
3 User interface
3.1 Control and function elements
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.1.4.2 Result tree
The Result tree shows the logic structure of the drive train.
• All components of a drive train are visualised with regard to their interconnection via the Result
tree.
• If a component is not clearly selected yet, e.g. if three different motors are still possible, the val-
ue range of the parameter is displayed.
3.1.5 Input area
In the input area, you enter the parameters for drive dimensioning.
• A dimensioning process is dynamically: depending on the selection made in a dimensioning
step, it may change.
• The representation of the input area depends on the dimensioning step.
• Depending on the task, the input fields, selection fields, the MotionDesigner, selection tables
appear with or without curve diagrams and decision fields.
Legend Information
 Representation in table form of quantities of the application and of rated quantities and calculated
values of the components.
 Diagrams of entered and calculated values as well as rated quantities for evaluating the drive task
(application), components and energy efficiency.