Lenze DSD - Manual (Page 343)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
343
11 Drive Dimensioning
11.4 Lenze gearbox selection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
c ~ Load capacity
• Ratio of the permissible rated torque of the gearbox
to the supplied rated torque of the motor-gearbox
combination.
A
th,M
~ (M
rms
) % % Thermal utilisation of the motor calculated in advance
with reference to the effective torque
• Specifies to which extent the motor is thermally load-
ed by the selection of the transmission ratio.
Relevant topics:
 Motor selection ( 313)
Possible messages:
 Utilisation >100 %, regarding the effective torque
( 455)
k
j
~ Load-matching factor of the motor calculated in ad-
vance.
• Load-matching factor resulting from the selected ra-
tio.
Relevant topics:
 Load-matching factor ( 321)
Possible messages:
 Max. mismatch is higher than permissible mismatch
( 456)
P
th,av,M
kW kW Medium power loss of the motor
i
req,K
Setpoint ratio of the additional drive element
i ~ Precalculated total ratio of the Lenze gearbox (G) and the
additional drive element (K)
Parameter Unit Description
Metric Imperial