Lenze DSD - Manual (Page 394)

15 Results: comparing, optimising, logging
15.4 Comparison and additional results
394
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
15.4 Comparison and additional results
15.4.1 Application Tuner
15.4.2 Comparison of the open projects
15.4.3 BlueGreen
The Application Tuner serves to
• change the data of the application and the motion data as well as to observe
and optimise the impacts on the drive,
• integrate further possible operating statuses and material recipes into the di-
mensioning for the reference scenario,
• create your own DSD project based on an optimised drive solution or to out-
put a protocol.
Click the icon to open the Application Tuner dialog box.
 Application Tuner ( 59)
If several projects are open at the same time, they can be compared with respect
to the application and the utilisation of the components.
• Click the icon to open the project comparison.
• The dialog box can also be opened with the command ViewProject com-
parison.
• Project comparison ( 61)