Lenze DSD - Manual (Page 249)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
249
8 Motion design
8.2 MotionDesigner
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Jerk
• An S-shaped acceleration consists of three sections:
• Showing the acceleration (rounding)
• Linear acceleration
• Hiding the acceleration (rounding)
• Values for rounding always apply to showing and hiding.
• The input area is only displayed if the S shape selection field in the Type input area is ac-
tivated.
Specification  Specification – jerk ( 261)
Left  Left – jerk ( 261)
Centre  Middle – jerk ( 261)
Right  Right – jerk ( 261)
Buttons
Set as default Accept values in the areas Basic values, Acceleration and Jerk as specification.
Apply changes Change the highlighted element in the Graphic area according to the entered values.
The button is only active if an element is selected in the Graphic area.
Attach element Attach an element with the specified values to the motion profile in the right Graphic area.
• The button is only active if no element is selected in the Graphic area.
Legend Description