Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 180)

180 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 8 Other Functions
Unit_Error_Action
These are the selections:
0 = Safe mode
1 = Reset (default)
Software_Error_Log_Full_Action
0 = Safe mode
1 = Reset (default)
Miscellaneous Commands The following commands relate to the operation of the power monitor at a
system level. These commands are found in the
Command.System_Registers
table.
Command_Word_1
Set this command word value to execute the listed action. These are the
selections:
22 = Restore factory defaults
23 = Reset power monitor system
These are the semantics:
Restore factory defaults = Clears all user-configured values from the
setup menus to their factory default settings.
Reset system = Warm reboot; performs a power-on self-test of the
PowerMonitor 5000 unit.
Related Functions
Configuration lock.