Rockwell Automation 1426 PowerMonitor 5000 Unit User Manual
Page 34
Advertising
34
Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 2
Install the PowerMonitor 5000 Unit
Configure the Connection
Follow these steps to configure the connection.
1.
From the Windows desktop, choose Start > Settings > Network
Connections.
A new Local Area Connection with a Device Name ‘Remote NDIS based
Device’ was added when you installed the driver.
2.
Right-click the connection name and choose Properties.
TIP
Setting up a PanelView 6 terminal in Windows CE follows a similar process.
Please refer to the Rockwell Automation Knowledgebase answer ID 115608 or
455067 if you need further details.
Advertising