Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 43)

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 43
Setup Chapter 3
Obtaining Access to the Configuration Pages
The PowerMonitor 5000 unit initially has security disabled by default. If your
power monitor's security is disabled, you can continue setting up the unit without
logging in.
If Security is Enabled
If security is enabled, the web page header displays ‘Logged in as:’ and a Log in
link.
If security is enabled, you need to log in as an administrator to configure setup
parameters. If not logged in as an administrator, you can view, but not change,
configuration parameters. If you need to log in, click the Log in link.
The USB connection has a special administrator account. Follow these steps to
log in with this account.
1. Type in the user name usbadmin.
2. Type in the password usbadmin.
3. Click Log In.
A dialog box reports the result.
To log in from the network Web interface, select a previously configured
administrator account user name and password. The PowerMonitor 5000 unit
does not permit logging in with the USB administrator login from the network.
You remain logged in until you log out or until 30 minutes have passed since
configuration changes have been applied.