Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 202)

202 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 9 Communication
8. Find the address in the list, select it, and click OK.
The Test Client displays the data and other properties of the selected tag.
This example uses F53:4, V2_N_Volts.
Controller Applications:
Class 1 Connection This section describes how to set up Class 1 connections with a Logix controller
and Studio 5000 Logix Designer application and RSNetWorx software.
Generic Ethernet Module Connection, RSLogix 5000 Software
Version 19 and Earlier
1. To create a connection to a PowerMonitor 5000 unit, choose the Ethernet
network under the applicable communication adapter in the I/O tree.
2. Right-click and choose New Module from the menu.
IMPORTANT Class 1 connections must be inhibited to update the power monitor firmware.