Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 370)

370 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Appendix B Technical Specifications
EMC Directive
This product is tested to meet Council Directive 2004/108/EC Electromagnetic
Compatibility (EMC) and the following standards, in whole, documented in a
technical construction file.
EN 61326-1:2006
Low Voltage Directive
This product is tested to meet Council Directive 2006/95/EC Low Voltage, by
applying the safety requirements of EN61010-1: 2001.
This equipment is classified as open equipment and must be installed (mounted)
in an enclosure during operation as a means of providing safety protection.
International Standard IEC 60529 / NEMA / UL 61010 Degree of Protection
The Bulletin 1426 PowerMonitor 5000 unit is rated as IP10 degree of protection
per International Standard IEC 60529. It is considered an open device per
NEMA and UL 61010 Follow the recommended installation guidelines to
maintain these ratings.
ANSI/IEEE Tested
Meets or exceeds the C37.90 Trip Duty: 2005 for protective relays and relay
systems on all power-connection circuit terminations.
WARNING: This is a class A product that is intended for use in an industrial
environment. In a residential, commercial, or light industrial environment, it
can cause radio interference. This product is not intended to be installed in a
residential environment. In a commercial and light industrial environment with
connection to the public mains supply, you can take adequate measures to
reduce interference.