Rockwell Automation 1426 PowerMonitor 5000 Unit User Manual
Page 193
Advertising
Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
193
Communication
Chapter 9
Class
4 = Assembly object
Instance
Look up the CIP Instance (in
) of the specific data table to read or
write. This example uses instance 844, the
MeteringResults.RealTime_VIF_Power table.
Attribute
3 = Data
Source Element
Used with Write messages, this specifies the controller tag to write to the power
monitor.
Source Length
Used with Write messages, this specifies the length in bytes of the data written to
the power monitor.
Destination
Used with Read messages, this specifies the controller tag in which to store the
data read from the power monitor.
Click the Communication tab.
Advertising