Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 198)

198 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 9 Communication
This creates a new, un-named topic in the left pane.
4. Give the topic a name pertinent to your application.
5. In the right pane, with the Data Source tab selected, browse to the
PowerMonitor 5000 unit by using the previously-configured driver.
6. With the topic highlighted in the left pane, and the PowerMonitor 5000
unit highlighted in the right pane, click Apply.
7. Click the Data Collection tab.
8. From the Processor pull-down menu, choose Logix5000.
This selection provides symbolic tag addressing.
9. Click Done.
OPC Topic configuration is complete. You can now use the RSLinx OPC
Server, and the topic just created, to serve data to your application.
TIP You can also select the SLC 5/03 processor type. The topic using this processor
type supports PCCC addressing.