Rockwell Automation 1426 PowerMonitor 5000 Unit User Manual
Page 48
Advertising
48
Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 3
Setup
Set Up Initial Security
If you choose to enable security on the power monitor, you must perform the
initial security setup by using the USB Web interface.
1.
In the USB web page, choose the Security folder and then the Security
page.
2.
From the Security Defaults pull-down menu, choose Enable Security.
3.
Accept the prompt regarding enabling security and accept the prompt to
reload the web pages.
4.
Log in with user name usbadmin and password usbadmin.
5.
Accept the prompt that the login was successful.
6.
To add a network administrator, click AddNew.
Advertising