Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 59)

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 59
Metering Chapter 4
Status
The Status.Wiring_Corrections table mirrors the parameters of the most recent
wiring correction command. In addition, the following parameters report the
status of the most recent command.
Last_Cmd_Rejection_Status
These are the values:
0 = No rejection
1 = Rejected; see rejection information
Rejection_Information
These are the values:
0 = No information
1 = Selected range is incomplete
2 = Command is already active. Please use command 5 (remove all wiring
corrections) to start over
3 = Two like inputs wired to one terminal
4 = Invalid Input parameter
Related Functions
• Voltage and Current Metering
• Power Metering
• Energy Metering
• Configuration Lock