ATEIS UAPg2 - Manual (Page 102)

UAPG2 MANUAL
Version EN.24
102
Create paging of PPM with LPC
To page the audio signal of PPMs you will use LPC (Link Page Control).
You cannot add more than one LPC per UAPG2. If you have several PPMs on a UAPg2, then you
have to use the different input of the LPC component.
For example if we have two PPMs on UAPG21 and one PPM on UAPG2:
Choose one of the LPC in the LPC list. No matter which LPC you choose, it's not necessary to use all
the inputs or outputs of the LPC. Even if you use one PPM (so one input of the LPC) you can use for
example the LPC 4x28.
We add a LPC component with 16 inputs and 16 outputs, even if we will use only 2 inputs and 2
outputs. In the first UAPG2 we wire the two inputs, and only one in the second UAPG2.
Then Double click on the component (LPC) to tell where the inputs are connected.
Each PPM which use one input has to be configured in its tab.