ATEIS UAPg2 - Manual (Page 66)

UAPG2 MANUAL
Version EN.24
66
defined). If you click none you erase all previous assignment of this parameter in this UAPG2.
Control: Here you can choose to active one (or several) Logic connector(s) of the UAPG2 system with
this button (logic in) or to activate this button with hardware control input.
1) Type of hardware connectors assigned to this software logic In.
2) Name of UAPG2 in the system which will have the assigned
connector. Here the 8 first control inputs of the UAPG2 named
training1 are defined as logic input. If you click none you erase all
previous assignment of this parameter in this UAPG2.
3) Number of the connector assigned to the software logic input
Note: To define control input as logic(TTL) or Analogue input, see define control input .
Event: You can choose to assign this software logic in to an Event (after you will have the possibility
to select the state of this software logic input when the event is activated)
URC: When you use a URC you first define “Label” it is just a name that appears on the URC’s screen.
Here you can assign this software input to a specific label (after the UAPG2’s name and URC’s name,
all the label will be listed for each URCs).
Right click on a analogical button of a parameters of a component
Copy: Copy the Logic In button, to past it into monitor window
Third party control: click on this item to select this adjustment
for third party control. This action will put the adjustment
(parameter) in the third party control list window.
Subpreset: Click on this item to select this adjustment for
subpreset control. When you use subpreset it is like you take
photography of the states of the selected adjustments.
Virtual Control: If you have defined one or several virtual analogical input(s) (virtual window) you can
assign this fader to one or several of those virtual knob(s).
1) Name of the type of virtual control
2) Name of the virtual control (here there is no
virtual control defined). If you click none you erase
all
previous assignment of this parameter in this
UAPG2.
Adjust type: simply choose which can of analogical input it is
(log, anti log or linear)
Adjust direction: choose the direction for increasing (or
decreasing) the value