ATEIS UAPg2 - Manual (Page 194)

UAPG2 MANUAL
Version EN.24
194
Gate With Sidechain
With this gate, you can control a gate on an audio channel (I) with an external sidechain signal(S).
When the Sidechain input (S) input goes above the threshold, the gate becomes active and the signal
on Input (I) goes to the output.
Gate Parameters
Parameter Range Comment
Mute Button Mute the gate's module
Bypass Button Switch off the gate's operation
Gate on LED, lit
green
Flash when the gate is active (open)
Sidechain gain (dB) -35.0 to
+
35.0 dB
Set the volume of the signal connected in the input S
Input gain (dB) -35.0 to
+
35.0 dB
Set the volume of the signal connected in the input I
Thd. (Threshold) (dB) −
60.0 to
+
20.0 dB
Sets the threshold level (input S) above which Gate will open.
Response time 0 to 5000 ms Adjust the time between the level's detection and the beginning of
the Gate operation
Attack time (ms) 0 to 1000 ms Adjust the fade-in time of the signal when Gate is working.
Hold time 0 to 5000 ms Adjust the time between the end level's detection and the end of
the Gate operation
Release time (ms) 10 to
10000 ms
Adjust the fade-out time of the signal when Gate is no longer
working
Depth (dB) -100 to 0 dB Attenuate the level when the Gate is active.