ATEIS UAPg2 - Manual (Page 46)

UAPG2 MANUAL
Version EN.24
46
ID Management
Opens the ID Management window (floating window)
This feature is available to prevent all unauthorized people to connect to the system via the network.
The ID management allows to gives access to the Master-Preset with an user name and password.
With this window you can create new user ([Add])
Erase users ([Delete])
Close the window ([Close])
Finally Edit user’s right [Edit]) this last button opens the following ID
Information window.
Password field: enter desired password
Idle to lock XX minutes: If the user doesn’t use
software during XX, the connection will be
closed and user will have to log again. When
the software was locked, users should enter an
account with a correct password. Or the
software will be locked permanently.
Keep preset for next user: It is possible that a user doesn’t have the right to log in with the last
preset used by another user (the one who just logged out) by clicking this option you assign the right
to this user to log in and use system even he doesn’t have the right with this preset.
Box at the right part of the window: Show all master presets of the system. Choose which master
preset the IDM user will have right to access and operate.
Logout User
Opens the User Login window (floating window)
Allow to logout or change users.
Available only if unconnected.
Logout ID
Opens the IDM Confirmed window (floating window)
Allow to logout or change ID users.
Compile
Start the compile process.
The software verifies that no major errors remain before uploading the
design into UAPG2 system.