ATEIS UAPg2 - Manual (Page 80)

UAPG2 MANUAL
Version EN.24
80
Time adjustment:
If you use the UAPg2 connected to internet, our advice is to synchronize the time with NTP protocol.
If you use the UAPg2 in stand alone, then the only way to adjust the time if needed is to use the
parameter "Time error (Sec)".
At first, set the time (from the PC or with NTP), and remember this time.
Leave the machine working in stand-along during one month.
After one month, record the current time and see the formula.
Time Error(sec)=(current time -previous time)/30
Set time error sec in machine configuration.
Every day at 00:00, the machine will automatically increase/decrease the time(calibration time).