ATEIS UAPg2 - Manual (Page 216)

UAPG2 MANUAL
Version EN.24
216
Tone generator
Generates either tone (single frequency) or sweep sequence (between two fixed frequencies and in
a defined interval of time)
Parameter Range Comment
Mute Button Mute the sound coming out from the component
Level -100 to +20
(dB)
Level of the signal
Sweep button Active the sweep mode (sweep of frequency)
Tone button Active Tone mode (one single frequency played)
Sweep type selector Choose the interval between Min and Max frequencies (octave, 1/3
octave…)
Tone Freq. 20 to 10k (Hz) If Tone mode is activated select the frequency played
Start Freq. 20 to 20k (Hz) Select the minimum frequency in sweep mode
Stop Freq. 20 to 20k (Hz Select the maximum frequency in sweep mode
Inc. Time (ms) Select the time between the frequencies change in sweep mode